Author Topic: V-Twin - Part II  (Read 797 times)

0 Members and 1 Guest are viewing this topic.

ernie

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • Email
V-Twin - Part II
« on: May 13, 2015, 05:08:42 AM »
A minor point concerning the oil pump and that's the gear offset from the center. There is no indication on how that gear is held in place. Just press a .125 dia. x .25 post into the center and place the gear over it. The gear will rotate around the post.

LOCKTITE 640 is specified in several places in the construction notes. DO NOT substitute another product. This stuff is incredibly strong up to 400 degrees. A small tube, although not cheap, will last a long time.