Author Topic: Dimension ?  (Read 1375 times)

0 Members and 1 Guest are viewing this topic.

les

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Dimension ?
« on: September 14, 2013, 02:09:21 PM »
Hi
On the gear cutting sheet #13 the depth of cut on the gear blanks are .045",
If cut this deep I'm cutting into the flat of the small intermediate camshaft gear that slips into the large camshaft gear !
 Can anyone help with this ?
                              Thanks Les.
« Last Edit: September 23, 2013, 04:22:58 PM by les »