Author Topic: Beamer Stirling Engine  (Read 2475 times)

0 Members and 1 Guest are viewing this topic.

dennisb

  • Newbie
  • *
  • Posts: 3
    • View Profile
    • Email
Beamer Stirling Engine
« on: May 22, 2013, 08:59:07 PM »
I can get the engine running if I don't connect the belt to the governor and fan. When I connect the belt to the governor/fan and turn the flywheel by hand it does not turn as easily and will not run.  My thought is that the rubber band is stretched too tight.  Any help would be appreciated.  Thanks.
Dennis