Author Topic: 1/2 Size "Mini Miser" Parts Sets Now Available!  (Read 2089 times)

0 Members and 1 Guest are viewing this topic.

ahowell

  • Administrator
  • Sr. Member
  • *****
  • Posts: 251
    • View Profile
    • Email
1/2 Size "Mini Miser" Parts Sets Now Available!
« on: September 21, 2011, 08:57:47 AM »
Hard-to-find materials to build a 1/2 size "Mini Miser".  Follow full-size Miser plans except reduce all dimensions by half.   Contains piston and crosshead alternative plans, and notes on construction/operation differences.

Part Set Contains:
(1) .95" length of 3/8" dia graphite (for power piston)
(2) 3/32" ID x 3/16" OD x 3/32" thick flanged, shielded ball bearings
(1) 3/32" x 1-1/4" drill rod (crankshaft)
(1) 2-7/8" square of 1/2" thick polystyrene foam (displacer piston)
(1) 1/2" slice of 3" OD x 2.75" ID plexiglass tube (displacer ring)
(2) 4" length of 1/8" dia delrin (displacer ring supports)
(1) 7/8" length of 1/4" dia delrin (crosshead)

All for just $17.50

Dad offered this kit many years ago, but discontinued it because he just didn't have time to cut all the parts (he wanted to build new engines!).  We're pleased to be able to offer this again.

To order, click this link http://www.model-engine-plans.com/engineplans/stirling/miser.htm and scroll to the bottom of the page.