Author Topic: Plexiglas Displacer Rings now available...  (Read 2453 times)

0 Members and 1 Guest are viewing this topic.

ahowell

  • Administrator
  • Sr. Member
  • *****
  • Posts: 251
    • View Profile
    • Email
Plexiglas Displacer Rings now available...
« on: April 07, 2011, 04:42:41 AM »
6" OD x 5.5" ID x 1.06" H Plexiglas Miser Displacer Ring:

Extruded Plexiglas Tubing cut at the factory to 1.06" height.  You will need to trim these down to 1".  Outer side is covered in a paper film for protection while cutting and shipping.  These are $14.00 each.  Sold separately from graphite & bearings materials set.

Click here to order: http://www.model-engine-plans.com/engineplans/stirling/miser.htm
« Last Edit: March 10, 2014, 07:45:21 PM by ahowell »