Author Topic: Howell V8 finished  (Read 6129 times)

0 Members and 1 Guest are viewing this topic.

Sage

  • Newbie
  • *
  • Posts: 20
    • View Profile
Howell V8 finished
« on: January 02, 2011, 09:09:52 AM »
I finally finished the V8 version of Jerry's V4.
I haven't run it yet. I thought I'd post some pictures before it scatters around the shop.
It's hard to believe it's been three years or so in construction. I hope it runs.
The intake manifold is a prototype since I'm not sure how many carburetors it will require. I can add more or move them around by simply making a new top plate for the manifold.
Weather permitting, I'll bring it to Cabin Fever in a couple of weeks.
Enjoy !


Dave Sage

Sage

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Howell V8 finished
« Reply #1 on: January 02, 2011, 09:13:32 AM »
Another three pictures.

Dave Sage

Sage

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Howell V8 finished
« Reply #2 on: January 02, 2011, 09:18:21 AM »
A couple of more pictures - Sorry, there a are a lot of limitations on file size and maximum post size.

Dave Sage

Sage

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Howell V8 finished
« Reply #3 on: January 02, 2011, 09:20:05 AM »
One last picture

Dave Sage


Mayhugh1

  • Newbie
  • *
  • Posts: 14
    • View Profile
    • Email
Re: Howell V8 finished
« Reply #4 on: January 04, 2011, 02:07:21 PM »
Really nice job. I'm working on the V4 and currently machining a set of intake and exhaust manifolds for it since I don't have the casting kit. I've finished the intake manifold and the exhaust manifolds are also nearly finished. I plan to be at Cabin Fever and hope to see you there. - Terry

Sage

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Howell V8 finished
« Reply #5 on: January 04, 2011, 09:57:15 PM »

Yes Terry I saw your post and pictures of the intake manifold you made. Nice work, you must be very CNC savy. I know I had quite a time getting the height above the block for the water passage connection, the angle of the runners and their connection to the heads, and getting them to all come together at the same time.
The manifold I have is a temporary outfit. The top plate comes off so I can make a new one to accomodate more carbs. Below the plate is just a big cavity to act as a runner.
 I'm pretty sure I'm going to need more than one carb but I started there. I made 6 carbs while I was set up to make them. Some for future projects I'm sure.

I really hope the weather holds so I can get to Cabin Fever (from Toronto). Please look me up. I'll be looking for all the V4's - hopefully you'll bring yours along regardless of it's state of completion.

Dave





Sage

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Howell V8 finished
« Reply #6 on: January 04, 2011, 10:05:25 PM »
The V8 is running !
And Yes I think it's going to need at least one more carb. If you look at Sherlines Craftsmanship Museum - Howell V4 build page, at the very bottom, you'll see the pictures and a video of the V8  running. Thanks to them for that. It's a really good page to look at just to get an understanding of what is involved in building the V4.
Here's a direct link to the video

http://www.craftsmanshipmuseum.com/HowellV8.wmv

Still lots more work to do to get it to run better.

Sage
« Last Edit: January 05, 2011, 03:12:24 PM by Sage »

TrackLife

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Howell V8 finished
« Reply #7 on: January 11, 2016, 10:33:01 AM »
I finally finished the V8 version of Jerry's V4.
I haven't run it yet. I thought I'd post some pictures before it scatters around the https://skinnyexpress.com/phen375-review phen375 shop.
It's hard to believe it's been three years or so in construction. I hope it runs.
The intake manifold is a prototype since I'm not sure how many carburetors it will require. I can add more or move them around by simply making a new top plate for the manifold.
Weather permitting, I'll bring it to Cabin Fever in a couple of weeks.
Enjoy !


Dave Sage

That's a beautiful V8. It must have felt great to finally see it running after 3 years of working on it. I bet it sounds amazing too.
« Last Edit: May 24, 2016, 08:15:38 AM by TrackLife »

Bob Cooke

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Re: Howell V8 finished
« Reply #8 on: August 05, 2016, 08:34:52 AM »
What an amazing piece of work!