Author Topic: Convert TIM-6 to TIM-3.6  (Read 2151 times)

0 Members and 1 Guest are viewing this topic.

ahowell

  • Administrator
  • Sr. Member
  • *****
  • Posts: 251
    • View Profile
    • Email
Convert TIM-6 to TIM-3.6
« on: August 17, 2010, 07:47:39 PM »
I got this e-mail from Bill Mitch today:

---------------------------------------

I just finished building the TIM-6. It is now a TIM-3.6. If anybody asks, tell them to leave out the diode and put a wire jumper where it goes. This diode is a safety so you can’t hook up the batteries backwards but also limits the voltage to the coil.
 
Bill