Author Topic: intake valve and flywheel rotation  (Read 2188 times)

0 Members and 1 Guest are viewing this topic.

toolmaker

  • Newbie
  • *
  • Posts: 8
    • View Profile
intake valve and flywheel rotation
« on: August 11, 2010, 07:31:32 AM »
i have the power house built but cannot get it started. should you see the intake valve move i have the right spring have compression,and relapped the valves, but do not see the intake valve open.also i have it set so that the flywheel turns clockwise looking at it ,it turns toward the cylinder, is that the correct way to rotate. i also get good spark tried starting fluid  but still no luck. any help or advise would be appreciated thanks  toolmaker