Author Topic: Photo of Metal Lathe Ball & Radius Turning Attachment  (Read 6593 times)

0 Members and 1 Guest are viewing this topic.

ahowell

  • Administrator
  • Sr. Member
  • *****
  • Posts: 251
    • View Profile
    • Email
Photo of Metal Lathe Ball & Radius Turning Attachment
« on: October 14, 2009, 08:29:39 PM »
"This heavy duty radius attachment was designed for an Emco Maier 'Maximat Super 11' lathe but it can be resized and/or modified to fit most 9"and larger machines.

It will turn convex radii up to 3" diameter and concave radii up to 4-1/2". There are fine feed screws on both X and Y axis movement for accurate control of radii on the workpiece, allowing for flanges on hemispheres and other circumstances. The unit features dovetail slides with integral adjustable gibs." - Jerry

Here's a photo of the unit:
« Last Edit: October 26, 2009, 07:56:32 PM by ahowell »