Author Topic: Howell 2-Jet Throttle  (Read 3577 times)

0 Members and 1 Guest are viewing this topic.


  • Administrator
  • Sr. Member
  • *****
  • Posts: 253
    • View Profile
    • Email
Howell 2-Jet Throttle
« on: October 13, 2009, 09:27:46 PM »
"It is small in physical size, very adjustable and not nearly as difficult to build as it looks. The configuration and size of mounting flange (or a spigot) at the base of the unit is easily modified to suit your engine requirements. The two threaded holes at the top are for mounting an air filter (included in the plans) if desired. Otherwise, a trumpet shape velocity stack may be used instead - or your own special treatment." - Jerry

Here's a photo of the Carb:
« Last Edit: January 20, 2010, 07:59:13 PM by ahowell »