Author Topic: Tapped holes in base plate of Powerhouse  (Read 2574 times)

0 Members and 1 Guest are viewing this topic.

tpj1939

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Email
Tapped holes in base plate of Powerhouse
« on: February 08, 2010, 10:58:14 PM »
    Has anyone noticed the error on the base plate drawing or am I wrong?  It calls for 5 ea. tapped holes of 6-32 size.  I believe that should be 10-32 size.   TJ :-\

tpj1939

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Email
Re: Tapped holes in base plate of Powerhouse
« Reply #1 on: February 15, 2010, 05:14:58 PM »
   I was assembling the engine and found that I was wrong.  It does use 6-32 screws. That is because of the paint protector sleeves.   TJ :-[