Author Topic: newbie  (Read 3330 times)

0 Members and 1 Guest are viewing this topic.

timar

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
newbie
« on: December 07, 2009, 06:21:05 PM »
any advice on a good lathe to start off with? i am new to model making and am tring to avoid wrong equipment. thanks

Mark Howell

  • Administrator
  • Newbie
  • *****
  • Posts: 6
    • View Profile
    • Email
Re: newbie
« Reply #1 on: December 07, 2009, 06:22:51 PM »
I started machining this summer.  I'm using this unit from LatheMaster and have been pretty happy with it so far.
http://www.lathemaster.com/LATHEMASTER8x14Lathe.htm

timar

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: newbie
« Reply #2 on: December 08, 2009, 07:08:38 PM »
thanks mark.i will be 35 miles outside baton rouge over the holidays, i will try to get over to their place.