J. E. Howell Model Engine Plans

Internal Combustion Engines => "PowerHouse" 4-Cycle Gas Engine => Topic started by: Aerostar55 on January 06, 2016, 10:16:02 AM

Title: valve timing Gears for Power House engine
Post by: Aerostar55 on January 06, 2016, 10:16:02 AM
[color=blue]Well along on building my Power House, stalled out on the gears!

I'm looking for a source for the gears on the Power House.  Boston gear doesn't show it on their web site.
Also tried ebay and Stock Drive Products.  I do not have the tooling required to make my own gears.

If you know of a good source for .563,  48 pitch - 26 tooth,  and 1.125 diameter 48 pitch 52 tooth brass gears leave a reply./[size][/color]